DC Power Supplies and Rectifier Systems for Plating

RoMan DC Power Supplies and Rectifier Systems
for corrosive plating environments and Anodizing applications

Contact Us  |  616-530-8641  |  Manufacturing Home  |  Corporate Home

RoMan Manufacturing
Connect with RoMan Manufacturing on Facebook Connect with RoMan Manufacturing on LinkedIn RoMan Manufacturing on YouTube

Plating Industry

Power Supplies and Rectifiers

RoMan Power Supplies and Rectifiers for Plating

RoMan DC Power Supply / Rectifier Systems are built to provide longer service life in corrosive plating environments due to complete epoxy encapsulation which also eliminates contamination from dust, debris and condensation.

RoMan Power Supply / Rectifier for Plating

RoMan DC Power Supplies / Rectifiers can be “closely-coupled” by mounting only 1 - 5m from process, which provides a number of significant installation advantages including:

  • Multiple zones providing more finite process control

  • MFDC computerized controls

  • Elimination of long, expensive copper bus which reduces capital investment

  • Lower resistance in the secondary circuit providing higher electrical efficiency and kWh reduction

  • Simplification of lock-out / tag-out procedure for a safe system

  • Smaller and lighter power supplies / rectifiers which are easily installed or maintained

  • Easily upgraded when additional throughput is required

RoMan DC Power Supplies / Rectifiers are available in single-phase, three phase and Medium Frequency / Inverter for Plating and Anodizing applications.

Output Ranges:

  • 0.5 - 200 Volts

  • 1,000 - 100,000 amps continuous